DevoNatural® Soap

Wood soap

Highly nourishing, cleaning and protective soap for untreated or oiled wooden and porous natural stone floors.

DevoNatural Soap - Houtzeep - Sterk voedende, reinigende en beschermende zeep voor onbehandelde of geoliede houten vloeren en poreuze natuursteenvloeren.Applications

Cleaning and nourishing natural soap for parquet and oiled wooden floors. This soapy solution can also be applied as a finish treatment for floors made of woods, such as spruce/pine, oak, etc. (test before using on tropical woods). Also suitable for maintaining porous/absorbant natural stone floors.

  • DevoNatural Soap maintains and cleans your floor without leaving traces or a film;
  • Suitable for indoor and outdoor use;
  • Adds a natural look;
  • Regular use reinforces your floor’s shine and makes it darker in colour.


Tip: You should preferably use the “two bucket” method, particularly on very large surfaces. One bucket containing soapy water is used for cleaning, together with a floor cloth or mop. The other bucket should be filled with water for rinsing. Always rinse the floor cloth or mop in the rinse bucket, before soaking it in the soapy water. This means that the soapy water stays clean and your parquet floor will not get dirty too rapidly.



Surface preparation: Start by cleaning the surface, without wetting it, using a vacuum cleaner or duster. When applying a basic treatment, make sure that wooden or natural stone surfaces are sanded evenly and all grease is removed.

Product preparation: Shake well before use.


Application method:

Regular maintenance: Pour 100 - 200 ml DevoNatural Soap into 10 litres of water. Then clean the floor or natural stone with a floor cloth that has been soaked in this soapy solution. Rinse the mop or floor cloth at regular intervals.

As a basic treatment for softwood floors: Pour 1 litre of the product into 10 litres of water. Apply this soapy solution using a mop and allow it to fully penetrate into the wood. Repeat this process until the surface is saturated.

You can also rub the floor by hand, using a floor cloth or, on large surfaces, use a rotating machine fitted with a fluid reservoir. You should then clean with a floor cloth, without rinsing.

Dry enough to walk on: After 30 – 90 minutes, depending on the porosity of the surface and quantity used.

Working temperature: 5 - 30°C.

Clean tools: Rinse the mop thoroughly in water after use.

Maintenance: Continue to maintain your floor using DevoNatural Soap. See also the DevoNatural maintenance sheet for oiled floors.

Shelf life: 2 years, if kept sealed in the original packaging. Protect against frost.

Safety: Water-based soap = solvent-free.

Composition (in compliance with the EC regulations): 5-15% anionic surface agents. Perfumes.


5 L


Technical data sheet DevoNatural Soap